6X Radiator Enamel White Paint Tin 180ml

Radiator Enamel White Paint Hard Drying Heat Resistant 151 Coatings 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

151 high gloss white radiator enamel paint is a top coat paint for radiators and pipes. It is specially formulated to provide a heat resistant finish on household water filled radiators and pipes and will provide a tough long-lasting finish and will prevent rust.

It is specially formulated to provide a heat resistant finish on household water filled radiators and pipes and will provide a touch long lasting finish and will prevent rust.

Quick Dry Heat Resistant White Gloss Radiator Enamel is a topcoat paint which is used to paint radiators and pipes.

• Top Coat Paint
• Tough And Durable
• Hard drying, high build, high performance.
• Use for inside and outside Surfaces Such as wood, metal and concrete
• Heat resistant
• White Gloss Enamel
• High Performance Paint
• Quick Dry

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.