3X Hammerite Hammered Gold Paint 250ml

Hammerite Direct To Rust Hammered Gold Quick Drying Metal Paint 250ml

Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces, and thanks to its special 3 in 1 formula there is no need to use a primer or undercoat - saving you precious time!

Touch dry in an hour, Hammerite gives long lasting protection and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture

• Hammerite Metal Paint -  Hammered
• Direct to rust
• Quick drying
• Stops rust
• Long lasting protection
• Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. This is a brilliant gloss finish which will retain its sheen for years.
• Coverage Brush: 4.5 sq m per litre - 2 coats
• Touch dry Dependent upon temperature / humidity
• Recoatable This is a 2 coating system. Ensure no more than 3 hours between coats. Final coat should be applied thick enough to flow to a gloss finish
• Location Interior, Exterior
• Application Brush, Roller Key benefits
• Can be applied directly onto rusty metal.
• No need for primer or undercoat.
• Corrosion resistant.
• Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside. System information
• For the best results makes sure all surfaces must be dry and free from dirt, dust, grease and salt.
• After suitable preparation apply 1 or 2 coats of Hammerite Metal Paint.
• After use, clean equipment with Hammerite Brush Cleaner and Thinners.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.