3X Paint Factory Black Matt Spray Paint 250ml

Black Matt Spray Paint Aerosol Auto Car Lacquer Wood Metal 250ml

• Make sure that surface is clean and dry for smooth finish.
• Quick Drying Effective Spray Paint 
• No Harmful to the Environment CFCs. 
• Bright colour with a smooth coat
• Good results are easily achievable
• Remove all dirt, grease, oil, rust, moisture etc for best results.
• Store at room temperature before use.
• Use in normal, dust free and windless conditions.
• Shake for 1 minute before spraying.
• During use occasionally shake to ensure colour uniformity and to prevent the nozzle from clogging.
• Test the spray can on an inconspicuous area before use.
• When using ensure the can is approx. 20 - 30 cm away from the surface
• Build up the paint in a few thin coats and allow the paint to become touch dry between coats (approx. 30 - 45 mints)
• After use ensure nozzle remains unblocked by either holding the can upside down and spraying on some cardboard or remove the nozzle and soak in thinners
• Location of application - Interior & Exterior
• For use on - Furniture, Metal, Wood, Plastic, Glass and more
• Surface finish - Matt
• Coverage - 2m² per litre
• Drying time - 16 hours
• Recoat time - 4 hours
• Touch dry time - 1 hour
• Paint/Stain/Varnish base - Solvent-based
• VOC description - Very high
• Litre capacity - 250ml
• Quick drying, bright colour with a smooth coat
• Highly concentrated
• Good results are easily achievable with these simple to use spray paints

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.