2X Canbrush H2 Hi-Temp Black 400ml

Canbrush High Temp 600°C Durable Heat Resistant Matt Black Spray Paint 400ml

A durable, high temperature protective paint specially formulated to withstand temperatures up to 600 degrees Celsius. It consists of a unique of heat resistant pigments in a silicone polymer resin.

• Resists up to 600°C
• Resists cracking and flaking
• Fast drying formula resists scratching
• Touch dry after 30 minutes
• Ideal for barbecues, grates, chimneys, radiators, as well as gas stoves, engines and many other metals substrates that are subjected to high temperatures.

Application Steps:

Step 1: 

• Before starting, always read instructions on aerosol can carefully
• Ensure you are in a well ventiated area
• Prepare and cover the area you are planning to do your spray painting with some old newspaper

Step 2:

• Make sure the surface of the object to be painted is clean, degreased and dry
• Sand the rough surface with fine grain sand paper and remove the dust with a tack cloth

Step 3:

• Practice your spraying technique to determine the spraying distance, the speed of the application etc

Step 4:

• Try to paint in straight passes from beginning to end and be sureto overlap slightly on each stroke to prevent sagging

Step 5:

• Apply primer using the steps above before applying your favourite coat to improve adherence and durability

Step 6:

• Apply multiple thin coats, allowing each coat to dry slightly before applying the next

Step 7:

• Clean the nozzle after use to prevent blockage. To do this, invert the can and press the nozzle a few times until transparent propellant comes out.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.