Non-Drip Black Gloss Paint Tin 180ml

Non-Drip Black Gloss Paint Hard Drying High Build 151 Coatings 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

151 Coatings Black Gloss Non-Drip 180ml paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood, metal and concrete leaving a high gloss finish.

• Hard drying
• High build
• High performance
• Suitable for both interior and exterior use, solvent based, small job gloss
• Can be used on metal/wood and concrete leaving a high gloss finish
• Hard Drying, High Build, High Performance.
• Black Gloss Non-Drip paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood, metal and concrete leaving a high gloss finish.
• Drying Time 8 to 10 hours.
• Recoatable in 24hrs

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.